English
54
9
Place a cup under the dispensing spout.
99999
Select "Espresso". Press the "OK" button to enter. The
machine starts brewing coffee. The following screen is
displayed:
99999
The "X" under the cup indicates that you can block the
process (still in grinding phase). If you press the "OK"
button at this time, storage is cancelled. Only when
"V" is displayed under the cup you can save the dose
adjustment.
99999
From now on you have to press the "OK" button when
the desired amount of coffee in the cup has been
reached. The "Espresso" button is now programmed.
Each time it is pressed, the machine will brew the
same amount that was just programmed.
99
This adjustment method is correct for all products
apart from the "AMERICANO". To adjust the length
of this product you have to use the configuration with
parameters. This method allows you to set the
beverage length and water amount values directly by
means of the keypad. This system requires the user to
carry out a subsequent check of the actual quantity of
product brewed in the cup.
99
All the necessary operating steps are shown below.
99
Press
the
"DOWN"
button
to
select
an
"AMERICANO".
99
BEVERAGE SETTINGS
Latte Macchiato
milk
AMERICAN COFFEE
999
Press the "OK" button to enter.
99
AMERICAN COFFEE
BEVERAGE LENGTH
WATER QUANTITY
Exit
999
Press the "OK" button to select "BEVERAGE
LENGTH".
99
BEVERAGE LENGTH
999
Press the "DOWN" or "UP" button to select the
desired value and then let the bar advance. The
number on the side identifies the bar value (in pulses).
Then press the "OK" button to confirm and exit.
99
Press the "DOWN" button to select the "WATER
QUANTITY" menu.
99
AMERICAN COFFEE
BEVERAGE LENGTH
WATER QUANTITY
Exit
999
Press the "OK" button to enter.
99
WATER QUANTITY
LOW (30%)
MEDIUM (50%)
HIGH (70%)
999
Press the "DOWN" button or the "UP" button to
select the desired value. Then press the "OK" button
to confirm and exit.
9
When this phase has been completed, the beverage is
programmed. It is recommended to perform a visual
check of the result.
99
