English
10
70
If this option is confirmed,
the
cycle
must
be
completed. Select “EXIT”
to exit.
Place the cleaning tablet in the brew group and refit the
group in the machine, making sure that all the components
have been inserted and that the door is closed.
After placing the tablet in the brew group, press the "OK"
button to confirm.
PUT BACK THE GROUP
IN THE MACHINE
OK
Exit
Put the brew group back into the machine and press the
"OK" button to confirm.
PLACE A CONTAINER
UNDER ALL THE
SPOUTS
OK
Place a container under the coffee dispensing spout and
press the "OK" button to confirm.
Brew Group Clean
The machine completes the cycle automatically.
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back
to
its
normal
operating mode.
It
is
recommended
to
remove the group and wash
it under fresh running water.
Ensure
that
the
brew
group is completely dry
before putting it back into
the machine.
10.2.8
Brew group lubrication
Lubricate the brew group after approximately 500 cups of
coffee or once a month. The grease to lubricate the brew
group and the complete "Service Kit" can be purchased at
your local dealer or at authorised service centres.
To see how many coffees
have been dispensed, see
the “PRODUCTS” menu
in the “STATISTICS” menu
of the tech. menu (see
section
“Description
of
messages
in
the
programming menu”).
Before lubricating the brew group, clean it under running
water as described in the "Brew Group Cleaning" chapter.
Lubricate the brew group guides using Saeco grease only.
Summary of Contents for Royal OTC SUP060
Page 80: ...Cod 59A023700 Ed 00...
