English
9
56
Ensure the machine is ready for use before dispensing hot
water. Place a container under the hot water dispensing
spout.
Press the "Hot Water" dispensing button. After a few
moments hot water will be dispensed from the hot water
dispensing spout.
The display will show:
Product brewing stops automatically when the preset level
is reached. The user can stop product brewing once the
desired quantity is reached by pressing the "Hot
Water"button again.
9.10
Adjusting Brewed Products
The machine allows you to adjust the product length
according to your needs and to the type of cup used.
Adjusting the product length can be performed by the
service provider via keypad in visual mode. The product
quantity is adjusted while being brewed. Only for the
“American coffee” and given its particular dispensing cycle,
you can adjust the dose and water percentage in
parametric form.
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Tech Menu
Settings
Statistics
Exit
Select the "SETTINGS" option and press the "OK" button.
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Press the “DOWN” button to select the “BEVERAGE
SETTINGS” option.
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Press the "OK" button to enter.
BEVERAGE SETTINGS
Espresso
Coffee
HOT WATER
Select the beverage that you wish to program and stop the
brewing process when desired, as shown on the display.
Set an espresso coffee as an example.
Place a cup under the dispensing spout.
Summary of Contents for Royal OTC SUP060
Page 80: ...Cod 59A023700 Ed 00...
