
EN
Press the
button to start
dispensing.
The machine needs a warm-
up time.
When the process is com-
plete, the machine dispenses
the solution into the con-
tainer.
When the solution is fi n-
ished, press the button
to stop dispensing.
Rinse the container thor-
oughly and fi ll it with ½ lt of
fresh water to be used for the
rinse cycle.
EN
Monthly
Pour the Saeco Milk Circuit Cleaner bag into a container. Add
½ lt of lukewarm water and wait for the product to dissolve
completely.
Insert the suction tube into
the container.
Place an empty container
under the Cappuccinatore.
EN
When the process is com-
plete, the machine dispenses
water into the container.
When the water fl owing out
looks clean, press the
button to stop dispensing.
Remove the container.
STEAM
ESC
STOP STEAM
STEA
ESC
STOP STEA
STEA
ESC
STOP STE
English
EN
Insert the suction tube into
the container.
Empty the container and
place it back under the Cap-
puccinatore.
Press the
button to start
brewing.
The machine needs a warm-
up time.
When the process is com-
plete, the machine dispenses
water into the container.
EN
When the solution is fi n-
ished, press the
button to
stop dispensing.
Remove the Cappuccinatore
from the machine.
Remove the suction tube.
Disassemble all the parts
shown in the fi gure.
Wash all the parts with luke-
warm water or in the dish-
washer.
EN
Make sure that any milk resi-
dues are removed.
Insert the Cappuccinatore in the steam wand seat until it
locks into place.
If the Cappuccinatore is fi tted up to its limit stop (beyond the
highlighted seat), it might not operate correctly since no milk
is sucked. In this case stop brewing, let the Cappuccinatore cool
down and SLIGHTLY move it downwards to place it back in its
proper seat (Fig. 20). Follow this procedure to restore the cor-
rect operation of the Cappuccinatore.
STEAM
ESC
STOP STEAM
STEA
ESC
STOP STEA
15
Instructions
Instrukcje
Polski
Wprowadzić rurkę ssącą do
naczynia
Opróżnić
naczynie
i umieścić je z powrotem
pod spieniaczem mleka
(Cappuccinatore)
Wcisnąć przycisk , aby
uruchomić płukanie.
Urządzenie potrzebuje
czasu na podgrzanie.
Po zakończeniu procesu
podgrzewania, urządzenie
odprowadza wodę do
naczynia.
PL
Gdy wyczerpany zostanie
cały roztwór, wcisnąć
przycisk , zatrzymujący
nalewanie.
Zdjąć spieniacz mleka (Cap-
puccinatore) z urządzenia.
Odłączyć rurkę ssącą.
Zdemontować wszystkie
części pokazane na
rysunku.
Przemyć
wszystkie
części letnią wodą lub
w zmywarce do naczyń.
PL
Upewnić się, że wszelkie
pozostałości po mleku
zostały usunięte.
Wsunąć spieniacz mleka (Cappuccinatore) na rurkę pary
i zablokować w tym położeniu.
Jeśli spieniacz mleka (Cappuccinatore) zostanie
dosunięty aż do samego ogranicznika (poza zaznaczoną
obsadę rurki), to może nie działać prawidłowo, gdyż
mleko nie będzie zasysane. W takiej sytuacji należy
przerwać spienianie, odczekać, aż nastąpi schłodzenie
spieniacza mleka i NIEZNACZNIE przesunąć go w dół
tak, aby znalazł się z powrotem w swoim prawidłowym
położeniu (rys.20). Powtarzać tę procedurę za każdym
razem, gdy wymagane jest przywrócenie prawidłowego
funkcjonowania spieniacza mleka.
PL
Royal Gran Crema_Ed01_EN_PL_mk_sgb.indd 15
2015-03-30 09:56:19