8
5
9
7
6
8
1
2
3
4
Place a container beneath the hot
water / steam wand.
Turn the knob until the
position is reached. Water
dispensing begins.
on
reload water
fi
lter
1.2.4 water settings
rinse
on
water
hardness
3/4
water
fi
lter
off
Have you replaced the old water
fi
lter with a new one?
Press “reload water
fi
lter”.
Access the machine settings menu
(see page 21 and 23). Press “water
settings”. Press “water
fi
lter”.
Press the
key to con
fi
rm and
activate of the new water
fi
lter.
1.2.4.2. water
fi
lter
Once
fi
nished, the “close steam knob” message appears on the display. Turn the knob back to the rest position ( ). Fill
the water tank if necessary. The machine is now ready for use and the water
fi
lter is activated (see page 23).
NOTE: if the Intenza water
fi
lter is not used, insert the small white
fi
lter previously removed (see step 1) into
the tank.
off
INTENZA WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water
fi
lter. After installation, select the water
fi
lter function under the machine
settings menu (see page 22). By setting the water
fi
lter status to ON, the machine informs the user when the
fi
lter
must be replaced.
Remove the water
fi
lter from its packaging, immerse it vertically (with the opening facing upwards) in
cold water and gently press its sides so as to let the air bubbles out.
Remove the small white
fi
lter from
the tank and store it in a dry place
sheltered from dust.
Fill the tank with fresh drinking
water and re-insert it into the
machine.
Set the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
Insert the
fi
lter in the empty tank. The
reference mark and the groove must
match. Push
fi
rmly until it is
completely inserted.
INSTALLATION
