23
MACHINE SETTINGS
Activate/deactivate the warning to replace the water
fi
lter.
Activate/deactivate the rinse function to brie
fl
y clean the
internal circuits of the machine.
This function is activated by default by the manufacturer.
Note: the rinse cycle is performed every time the
machine is started up, after the warming phase.
This function allows you to set various water settings.
Adjust the machine's water hardness setting. This will
allow the machine to request descaling at the right time.
Measure the water hardness as shown on page 6.
water
settings
rinse
on
water
fi
lter
off
water
hardness
3/4
Important note.
This setting automatically adjusts the parameters which allow the
user to perform correct machine maintenance.
Select “on”
: only when the water
fi
lter is installed in the water tank as
shown on page 8.
This function is automatically activated after selecting “reload water
fi
lter”.
Select “off”
: when there is no water
fi
lter in the water tank.
Select “reload water
fi
lter”
: when a new water
fi
lter is installed in the
water tank.
NOTE: if the water
fi
lter is not available, insert the small white
fi
lter
previously removed (see step 1 - page 8) into the tank.
