Saeco MAGIC COMFORT+, User'S And Maintenance Booklet

Page: 25 / 26

25
TROUBLESHOOTING
The automatic coffee
brewing does not start
Water is dispensed
instead of coffee
Steam and/or hot water
are not dispensed
Coffee flows too quickly
Coffee is flows too slowly
Coffee is not hot enough
Coffee is not creamy
The coffee brewing is
reduced, the machine takes
longer to heat and the water
capacity is not correct
The central unit cannot be
removed
Possible cause/causes
The machine is not getting power
The service door is open
The steam key is being
pressed
The pre-ground coffee selection key
has been pressed while there is no
coffee in the container
The steam/hot water spout hole is
clogged
Grinding too coarse
Grinding too fine
The central unit filter is jammed
The cup has not been preheated
The coffee blend is not suitable,
coffee has not been recently ground,
the pre-ground coffee has been
ground too thin or too coarse
Limescale in the machine
The central unit is out of position
Resolution
Turn the main switch on, check plug and
fuse
Close the service door
Insert and lock the central unit
Clean the central unit (see page 43)
Disactivate the steam function (see page
41)and drain the machine (see page 35)
Fill with water or coffee beans and
restart the cycle
Drain thoroughly the machine again
Fit the coffee grounds container
properly
Clean the grinder
Fill with pre-ground coffee
Clear it with the aid of a thin needle
Adjust the grinder to a finer grinding, ex.
from 6 to 3
Adjust the grinder to a coarser grinding.
ex. from 6 to 7
Clean the filter
Place the cup on the heating plate
Try another coffee blend
Carry out the machine descaling, as
described at page 43
Switch on the machine. Close the service
door and fit the coffee grounds container.
The machine returns automatically in its
starting position.
BREW UNIT MISS
BREW UNIT BLOCK.
WATERTANK EMPTY
COF.BEANS EMPTY
READY FOR USE
OVERTEMPERATURE
DREGDRAW. MISS.
GRINDER BLOCKED
No message on the
display
Trouble
Only skilled personnel are authorised to service and repair the machine. The user might incur serious injuries
should repairs not be properly carried out. The manufacturer declines any liability whatsoever, should repairs
fail to be carried out according to the instructions contained in this manual. Furthermore, in these cases warranty
rights cannot be honored.