Saeco MAGIC COMFORT+, User'S And Maintenance Booklet

Page: 13 / 26

13
UNPACKING/INSTALLATION
Unpacking/Installation
Standard packing is strong enough to protect the
machine during mail shipping. Keep this package to
return the machine to the manufacturer should it be
necessary.
Before installing the machine, keep to the following
safety indications:
Position the machine in a safe place.
Do not allow children to play with the machine.
Make sure the machine is not placed nearby hot
surfaces or open flames.
Always use the machine with the swivel (24). Thus,
when installing the machine, make sure to rest it
directly on this support by inserting it into the slot on
the lower side of the machine.
Now the machine is ready to be connected.
Power supply connection
Warning: electric current may cause death!
The coffee machine must be connected to an ad-
equate socket. Voltage must suit to the voltage
specified on the appliance rating plate.
Never use defective power cords.
Defective power cords and plugs must be replaced
by authorised personnel.
Should an extension cord be used, check its perfect
condition. The extension cord must have a minimum
section of 1,5 mm2 or 16 AWG and must be
supplied with a three-pole plug/socket.
Starting and use
Danger!
Electric voltage may cause death! Parts
under current shall never be in contact
with water: danger of short-circuit! Over-
heated steam and hot water may cause
burns. Do not direct steam or water jet
towards the body; furthermore, great
attention must be given when touching
either the dispensing tube or the heating
plate: danger of burns!
For your own safety as well as for other
people’s safety, keep to the safety pre-
cautions described (see page 31).
Never use the machine without water or coffee
beans.
Remove measuring spoon, brush and the central unit
key from the coffee grounds container (1) and keep
them within reach.
Unwind the power cord (5) from the rear side of the
machine.
25
The bean coffee container (16) is attached with two
screws. Remove the cover (15) and fill it with coffee
beans (approx. 300 g), then replace the cover.
Adjust grinding by means of the grind adjustment
lever (17), positioning it on point 5 of the scale.
Never fill the coffee bean container with other
products. They might damage the machine!