Saeco Lirika, User Manual, Page: 50 / 56

• 50 •
Machine Installation - Service Provider Manual
12 The machine will now start dispensing the descaling solution
at intervals (the bar shows the cycle progress).
13 When the solution in the tank is fi nished, empty and rinse
the tank with fresh drinking water, as indicated by the machine.
RED
14 Empty the containers used to collect the liquid dispensed by
the machine.
15 Rinse the water tank thoroughly and fi ll it with fresh drinking
water up to the “CALC CLEAN” level.
16 Remove any liquids from the drip tray and insert the tray
back into the machine.
17 Place a container under the steam/hot water wand and an-
other one under the coff ee dispensing spout.
18 Insert the tank into the machine.
19 Press the “ ” button (18); the machine performs the rinse
cycle.
Note: The rinse cycle can be paused by pressing
the “
” button (18). To resume the cycle, press
the “ ” button (18). This allows you to empty the con-
tainer or to leave the machine unattended for a short
time.
20 When the amount of water needed for the rinse cycle has
been completely dispensed, this icon is displayed.
Press the “ ” button (22) to quit the descaling cycle.
Note: The rinse cycle is performed in order to have
the circuit cleaned with a preset amount of water
to ensure proper machine performance. If the water tank
is not fi lled up to the CALC CLEAN level, the machine may
require two or more cycles to be carried out by displaying
the following screen.
RED
Repeat steps from 13 to 19, then continue with step 20.
21 Once the rinse cycle has been completed, the machine carries
out the circuit priming, the warm-up cycle and the rinse cycle in
order to be ready for product brewing.
22 Empty the containers used to collect the liquid dispensed by
the machine.
23 Empty the drip tray and place it back.
24
The machine is now ready for use.
Note:
- The descaling solution must be disposed of according
to the manufacturer's instructions and/or regulations
in force in the country of use.
- After completing the descaling cycle, wash the brew
group as described in the "Weekly Cleaning of the
Brew Group" section in the "Cleaning and Mainte-
nance" chapter.