Saeco Lirika, User Manual, Page: 20 / 56

• 20 •
Machine Use - User Manual
4 Press and hold the “ ” button (19) until the following
screen is displayed:
The machine is now in programming mode.
5 Insert the suction tube into the milk container.
6 Place a cup under the Cappuccinatore.
7 Press the “ ” button (18) to start dispensing.
8 The machine requires some preheating time.
9 The machine starts dispensing frothed milk into the cup.
10 When the desired quantity of frothed milk is reached, press
the “ ” button (18).
The button is now programmed. Every time it is pressed, the
machine will dispense the same amount of frothed milk that was
programmed.
3.19 Dispensing Hot Water
Danger of burning! Dispensing may be preceded
by small jets of hot water and steam. Wait until
the end of the cycle before removing the water dispens-
ing spout.
1 Slightly tilt the water dispensing spout and insert it all the
way into the guides of the machine.
2 Push the water dispensing spout towards the bottom while
rotating it until it is locked onto the machine as shown in the fi g-
ure.
3 Place a container under the hot water dispensing spout
(Fig.10, page 3) .
4
Press the “ ” button (24). The following screen is displayed: