Saeco Lirika, User Manual, Page: 42 / 56

• 42 •
Machine Installation - Service Provider Manual
The menus should be PASSWORD-protected.
The PASSWORD will not be requested if set on the
default value (0000). It should be changed upon
1
st
use to prevent unauthorised access. After this change,
it should be entered again at each access, every time the
display shows:
0 0 0 0
Refer to section 10.4 on how to set the PASSWORD.
10.2 Programming Controls
When the machine menus are accessed, the buttons on the keypad take on new functions.
" " "change" button (18)
This button allows the parameters to be changed when they are displayed.
" " "change" button (20)
This button allows the parameters to be changed when they are displayed.
“ ” button (24) (Scroll parameters / OK) This button allows the user to:
1 scroll through the menu pages;
2 confi rm the parameter/value after changing it.
" " "ESC" button (22)
This button allows the user to exit without changing the edited or selected param-
eter.
Note: Press it repeatedly to exit programming mode.
To enter the password:
1 Press the “ ” (18) or “ ” (20) button to set the desired
number.
2 Press the “ ” button (24) to move on to the next number
(when it gets to the end, it will start again from the beginning).
3 Repeat steps 1 and 2 until the set password has been entered.
4 Press the “ ” button (21) to confi rm and to access pro-
gramming mode.
Note: If the PASSWORD is forgotten, you can reset
it by entering a PUK code. You have to request the
PUK code to the Saeco service centre, who will guide you
through the procedure.