Saeco Intelia Evo HD8752, User Manual

Page: 20 / 64

18
ENGLISH
4 Insert the fi lter into the empty water tank. Press it down until it cannot
move any further.
5 Fill the water tank with fresh water and reinsert it into the machine.
6 Dispense all the water of the tank by using the hot water function (see
“Hot Water Dispensing” chapter).
7 Fill the water tank again.
Y
ello
w
8 Press the “ ” button and scroll the pages by pressing the “ ” but-
ton until the following screen is displayed.
9 Press the “ ” button to select “ON” and press the “ ” button to
confi rm.
Y
ello
w
10 To exit, press the “ ” button. The machine shows this display and is
ready to brew.
In this way the machine has been programmed to inform the user of
the need to replace the “” water fi lter.
Gr
een
3
Set the fi lter according to the measurements performed (see previous
chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip