background image

4

ENGLISH

IMPORTANT

Safety Instructions

This machine is equipped with safety features. Nevertheless 
read the safety instructions carefully and only use the ma-
chine as described in these instructions to avoid accidental 
injury or damage.
Keep this user manual for future reference.

The term 

WARNING

 and this icon warn against possible 

severe injuries, danger to life and/or damage to the machine.

The term 

CAUTION

 and this icon warn against slight 

injuries and/or damage to the machine.

Warning

•  Connect the machine to a wall socket with a voltage 

matching the technical specifi cations of the machine.

•  Do not let the power cord hang over the edge of a table or 

counter, or touch hot surfaces.

•  Never immerse the machine, mains plug or power cord in 

water (danger of electrical shock).

•  Never direct the hot water jet towards body parts: danger 

of burns!

•  Do not touch hot surfaces. Use handles and knobs.

•  Remove the mains plug from the wall socket:

-  If a malfunction occurs.
-  If the machine will not be used for a long time.
-  Before cleaning the machine.

Summary of Contents for Intelia Evo HD8752

































































Reviews: