20
To rinse the filter, press the HOT WATER button and let half a litre of water flow out from
the hot water/steam dispensing spout. Discard this water.
The machine is ready for use.
Note: After installing the AquaClean filter you do not have to perform the manual rinsing cycle.
Manual rinsing cycle
1
Place a container under the hot water/steam dispensing spout.
2
Press the AROMA STRENGTH button to select pre-ground coffee.
Do not add pre-ground coffee.
3
Press the ESPRESSO or ESPRESSO LUNGO button. The machine starts dispensing water.
4
When the machine stops dispensing, empty the container. Repeat steps 1-3 twice.
5
Place a container under the classic milk frother.
6
Press the HOT WATER button. Hot water dispensing starts automatically.
,
Dispense water until the display shows no water icon.
7
Fill the water tank with fresh water up to the MAX level and remove the container.
The machine is ready for use.
AquaClean filter
The AquaClean filter is designed to reduce limescale deposits in your coffee machine and provide
filtered water to preserve the aroma and flavour of each cup of coffee. Using 8 AquaClean filters
correctly allows you to descale your machine every 2 years only, or every 5000 cups (with 100 ml
capacity)
AquaClean filter installation
Note: Your machine has to be completely limescale-free before you start to use the AquaClean filter.
If you did not activate the filter upon first use and brewed more than 50 cups (with 100 ml capacity),
you need to descale the machine before you activate the filter.
1
Remove the AquaClean filter from its packaging. Shake the filter for about 5 seconds.
2
Immerse the filter upside down in a jug with cold water and wait until no more air bubbles
come out. (Fig. 10)
3
Remove the water tank from the machine and insert the filter vertically onto the filter
connection. (Fig. 11)
4
Fill the water tank with fresh water and slide it back into the machine.
5
Press the MENU button and scroll the menu to the AquaClean filter option.
Then press the OK button to select the AquaClean filter option.
Note: If you are installing the filter at first time use, follow the steps in chapter ‘First installation’.
6
Select ON on the display and confirm the activation by pressing the OK button.
Note: The display shows a tick icon to confirm the activation.
7
To rinse the filter, press the HOT WATER button and let half a litre of water flow out from
the hot water/steam dispensing spout. Discard this water.
Note: It can take a while until water comes out of the dispensing spout. The filter needs to be fully filled
and rinsed with water
ENGLISH
8
4219_460_2735_2_DFU-Simple_A5_v1.indd 8
15/12/15 09:53