Frothing milk
Danger of scalding. Dispensing may be preceded by small jets of hot water. Only use the
appropriate protective handle.
1
Fill 1/3 of a jug with cold milk.
2
Immerse the classic milk frother in milk. Press the STEAM button.
3
Froth the milk by gently swirling the jug and moving it up and down.
4
Press the OK button to stop frothing.
Hot water
Danger of scalding. Dispensing may be preceded by small jets of hot water. Only use the
appropriate protective handle.
1
Place a jug under the classic milk frother.
2
Press the HOT WATER button. Hot water dispensing starts automatically.
3
Press the OK button to stop hot water dispensing. Remove the container.
Descaling
You have to descale the machine when the display shows the CALC CLEAN icon or after
8 AquaClean filter replacements.
Note: If you do not descale when the display shows the CALC CLEAN icon or after 8 AquaClean filter
replacements, the machine may stop working properly. In this case, repairs are not covered by the
guarantee. (Fig. 15)
Never drink the water with descaling mixture that you pour into the water tank or any water
with residues that comes out of the machine during the descaling procedure.
The descaling procedure lasts approximately 30 minutes. Only use the Saeco descaling solution to
descale the machine. The Saeco descaling solution is designed to ensure optimal performance of the
machine. You can buy the Saeco descaling solution in the online shop at
www.shop.philips.com/
service.
Descaling procedure
Note: You can pause the descaling or rinsing cycle by pressing the ESC button. The display will show the
following icon. To continue the descaling or rinsing cycle, press the OK button (Fig. 16).
1
Remove and empty the drip tray. Slide the drip tray back into the machine.
Note: Remove the AquaClean water filter from the water tank (if present).
2
Remove the classic milk frother from the steam wand.
3
Press the OK button.
4
The display shows the following icon to indicate that the machine enters the descaling cycle.
If you want to exit the descaling cycle, press the ESC button. (Fig. 17)
5
Pour the entire bottle of Saeco descaling solution (250ml) into the water tank.
6
Add water to the descaling solution in the water tank up to the CALC CLEAN indication.
7
Place a large container (1.5 l) under the steam wand and dispensing spout.
ENGLISH
10
4219_460_2735_2_DFU-Simple_A5_v1.indd 10
15/12/15 09:53
