1
Tilt the hot water dispensing spout slightly and insert it into the
machine.
2
Press and turn the hot water dispensing spout downwards to
lock it in the machine.
To remove the hot water spout:
1
Press the release buttons on the sides of the hot water
dispensing spout to unlock it.
2
Lift the hot water dispensing spout slightly and pull it out of the
machine.
Dispensing hot water
Caution: Steam and hot water may spray out of the hot water
dispensing spout when brewing starts. Wait until the cycle has
ended before removing the hot water dispensing spout.
1
Press the MENU button. Select 'Drinks', confirm and scroll to
select 'Hot water'.
Caution: Only select 'Hot water' in the menu when the hot water
dispensing spout is installed.
2
Press the OK button to confirm.The display reminds you to install
the hot water dispensing spout, press the OK button to confirm.
The machine starts dispensing hot water.
-
To stop dispensing hot water, press the OK button.
Adjusting quantity and taste
Saeco Adapting System
Coffee is a natural product and its characteristics may vary according
to origin, blend and roasting. The machine is equipped with a self-
adjustment system that allows it to get the best taste out of your
favorite coffee beans. It regulates itself after brewing some coffees.
Adjusting coffee and milk length
You can adjust the quantity of beverage brewed according to your
taste and to the size of the cups.
1
To adjust the length of espresso, press and hold the ESPRESSO
button until the display shows the MEMO icon.
-
The machine enters the programming phase and starts to
brew the selected beverage.
1
1
2
ESPRESSO
English
21
4219_460_3631_2_Lux_Booklet_A5_v2.indd 21
21/07/17 14:30
