Saeco Incanto HD8911/47, Manual

Page: 10 / 56

Manual rinsing cycle
During the manual rinsing cycle, fresh water flows through the water and
coffee brewing circuit. This takes a few minutes.
Hot water circuit rinsing
1 Place a container under the classic milk frother.
HOT WATER
HOT
WATER
2 Press the HOT WATER button.
-
The machine starts dispensing hot water.
Note: To interrupt the rinsing cycle, press the OK button.
3 When the machine has dispensed 2 cups of hot water (0.5 l), press the
OK button to stop the hot water dispensing. Repeat steps 1 to 3 twice.
Coffee brewing circuit rinsing
1 Place a container under the coffee dispensing spout.
AROMA STRENGTH
GROUND COFFEE
2 Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
Note: Do not add pre-ground coffee in the pre-ground coffee
compartment.
3 Press the ESPRESSO LUNGO button.
-
The machine starts dispensing water from the coffee dispensing
spout.
4 Wait until the machine stops dispensing water and empty the container.
5 Repeat steps 1 to 4 twice.
6 When the machine has returned to the main menu, empty the container.
The machine is ready for use.
water filter
We advise you to install the water filter to reduce limescale
deposits in your coffee machine and to provide filtered water for preserving
the aroma and flavor of each cup of coffee.
Installing the water filter
Note: Always confirm activation of the water filter in the machine
menu as described below. By activating the water filter in the
machine menu, the machine indicates when you need to replace the filter.
1 Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use. You will need it for
the descaling process.
10
English