Saeco D.A. 8P Standard, Operation And Maintenance

Page: 5 / 40

English
5
It is considered improper use:
-
any use different from that intended and/or with techniques
different from those indicated in the publication;
- any service on the vending machine which is in contrast with
the instructions of this publication;
- any use after tampering components and/or after alterations
of safety devices;
- installation outside the vending machine.
2.3 Residual risks
Dispensing channel is not equipped with protections able to avoid
accidental contact of hands with beverage still hot.
2.4 Vending machine identification
2.5 Technical specifications
Size Standard Instant
L
. .................................................................
mm 520
P
. .................................................................
mm 560
A
. ...............................................................
mm 810
Weight
. ....................................................................
kg 58
Installed power
. ................................................
W (*)
Power supply voltage
. ...............................
V (*)
Electric voltage frequency
. ....................
Hz (*)
Supply cord length
. ......................................
mm 1600
Water supply
. ....................................................
system connection
Water system pressure
. ............................
bars 1.5 - 8
Water system connection
. .....................
3/4" gas fitting
A-weighted sound pressur level is below 70 dB
Container capacity
Coffee beans
. ....................................................
kg 4
Instant coffee
. ...................................................
kg 0.5 to 1.2
Instant product
. .................................................
kg 4
(at 2/3 of capacity)
Sugar
. ........................................................................
kg 2
Cups
. ..........................................................................
n
°
280
Stirrers
. ......................................................................
n
°
280
(*) See label located in the back of vending machine
fig. 2
Vending machine is identified by the model name and serial number
indicated on the special label (fig. 2).
On the label the following specifications are indicated:
• Manufacturer’s name
• CE mark
• vending machine model
• serial number
• year of construction
• some manufacturing specifications:
- power supply voltage (V)
- power supply frequency (Hz)
- absorbed power (W)
- pressure permissible in water system (MPa)
Important
For any question to AUTHORISED SERVICE CENTRES, always
refer to such a label, indicating specific vending machine data,
that are printed on it.
fig. 3
99588.33
A
P
L