Saeco CRISTALLO 400, Use And Maintenance

Page: 31 / 64

31
English
INST.PROD.PREHEAT. INSTANT PRODUCT 01
0
COFFEE PREHEATING
300
COFFEE PREHEATING
> 300 <
INST.PROD.PREHEAT. INSTANT PRODUCT 01
10
INSTANT PRODUCT 02
0
Example: the settings shown in the figure enable
preheating for instant product 1 with 10 units of water
and do not enable preheating for instant product
2
.
Instant product preheating takes place if:
- at least 3 minutes have passed since the mixing bowl
was last used;
- the quantity of water for the instant product is < 50
units.
- Coffee pre-heating
It allows enabling a pre-heating cycle of the Brew Group
if it remains inactive for a period of time.
This menu allows setting the seconds of inactivity after
which the pre-heating cycle has to take place. The settable
values are:
- 0 (zero) pre-heating cycle disabled,
- from 60 seconds to 900 seconds at intervals of 60.
The default value is 300.
- Programmable texts
STAND-BY TEXT: it enables setting the message appearing
on the display when the vending machine is in standard
operating mode.
DISPENSING TEXT: it allows setting the message
appearing on the display when the vending machine is
dispensing a product.
PRESELECTION TEXT *(YY): it allows setting the message
appearing on the display when the preselection mode of
the preselection key is active (Fig. 40).
- Instant product preheating
Enables selection of the instant products for which the
preheating function will be enabled.
By enabling this function, the vending machine performs
a preliminary dispensing of water through the circuit
corresponding to the instant product selected. The user
can choose for which instant product prerinsing can be
enabled, by setting cu cm of water to be used.
CONTINUES
PRESELECTION *(YY)
PRESELECTION *(YY)
PRESELECTION *(Y)
PRESELECTION *(Y)
DISPENSING TEXT
_WAIT FOR PRODUCT
PROGRAMMABLE TEXTS
STAND-BY TEXT
_CRISTALLO 400
OUT OF SERVICE TEXT
_CALL ASSISTANCE
*(Y)
Preselection 35-50 Preselection 27-38
CRISTALLO 600 CRISTALLO 400
*(YY)
Preselection 19-34 Preselection 15-26
CRISTALLO 600 CRISTALLO 400
PRESELECTION TEXT *(Y): it allows setting the message
appearing on the display when the preselection mode of
the cup key is active (Fig. 40).
OUT OF SERVICE TEXT: it enables setting the text on the
display when the vending machine stops due to a fault.