English
16
RINSING PROGRAMMED
This function allows the dispensing of a minimum quantity of hot
water (abt 5 cc) by the machine to prevent sediments in the coffee
dispenser from forming; this wash is automatically carried out after
a programmed time lapse (20 to 240 minutes) from the last dis-
pensing of coffee.
-
By confirming
“ON”
, the modification cursor is set on the last
digit to the right and its value can be modified through steps of
10 min. at a time;
always confirm possible modifications.
-
By confirming
“OFF”
, the machine doesn’t perform any wash.
N.B.:
During the wash the machine displays
“RINSING PRO-
GRAMMED”
;
the wash can also be manually carried out by pressing key for
three seconds.
GROUP RINSING
This function allows the washing of the brewing unit (ref.
25
, fig.
1), by using the specific tablets (for information on the tablets refer
to the authorised service centre), and has been set up so that the
user is guided through the various operation phases.
-
The process starts from point
“GROUP RINSING”
.
-
Press key
; the display visualises
“PUT THE TABLET
INTO THE GROUP”
.
-
Draw the brewing unit out; the display visualises “
INSERT
BREWING UNIT”
.
-
Insert tablet in the brewing unit and return the unit in position;
the display shows
“CLOSE SERVICE DOOR”
.
-
Close the door; the display shows “
RINSING”
.
The machine starts the actual wash cycle at the end of which
the display will show “
REMOVE THE GROUP AND RINSE
IT WITH WATER”
.
-
Remove the brewing unit; the display shows
“INSERT
BREWING UNIT”
.
-
Proceed to wash the brewing unit in running water.
-
Re-insert the brewing unit; the display shows
“CLOSE SERV-
ICE DOOR”
.
-
Close the door; the display shows
“RINSING COMPLET-
ED PRESS STAR BUTTON”
.
Press again key to finally quit the menu and to make the ma-
chine ready for use.
CLOCK
This function allows the setting of the machine’s clock and date
device.
-
By confirming
“CLOCK”
, the cursor is positioned on top of
the hours that can then be modified.
-
After confirming the set time, the cursor moves to the next ele-
ment to be modified (the minutes, followed by the day of the
week, day, month and lastly the year).
AUTOMATIC OPERATION
This function allows to program the automatic switching on and off
of the machine, in two different time slots, for each day of the
week.
-
By confirming
“ON”
, the machine is pre-set for this function.
-
By confirming
“OFF”
, the machine can only be switched on
and off manually through the main switch (ref.
10
, fig. 1).
Automatic switch-on and switch-off that have possibly been
already programmed will be memorised in any case.
-
For the programming of time slots and days, see the next func-
tion
“ON/OFF TIME”
.
N.B.:
Automatic machine switching on is only possible with the
main switch (ref.
10
, fig. 1) in position “
I
”.
GROUP RINSING
GROUP RINSING
CLOCK
AUTOMATIC OPERATION
ON/OFF TIME
COUNTERS
ANTIFREEZING
UNBLOCKING
09:32 M 12 MAR 97
ON
OFF
ON 1: mtwtfss 08:00
OFF 1: mtwtfss 18:00
ON 2: mtwtfss 09:00
OFF 2: mtwtfss 12:30
ON 3: mtwtfss 08:00
OFF 3: mtwtfss 18:00
ON 4: mtwtfss 09:00
OFF 4: mtwtfss 12:30
TOTAL COFFEE XXXXXX
TOTAL WATER XXXXXX
ON
OFF
CODE: 0000
