English
30
Too low stop bar
8.4
Stop bar adjustment
The bottle tray is equipped with an (adjustable) angle bar,
designed to cause the bottles to fall correctly into the
dispensing tray.
This stop bar needs adjustment if the distance between the
bar and the bottle cap is not the recommended distance
(Fig. 43).
Fig. 43
NO
Too high stop bar
Correctly positioned
stop bar.
To adjust the stop bar, proceed as follows:
- open the door and pull the tray out until it stops;
- unscrew the locking screws provided in the vertical
rods(Fig. 44);
Fig. 44
- place a bottle in the lane, with its cap resting against
the bar, and move the bar manually until the right
position adjustment is obtained (Fig. 45);
Fig. 45
- after completing the adjustment, re-tighten the screws.
NO
OK
