English
16
5
SAFETY
5.1
Foreword
To comply with the Machine Directive 89/392, with the
Low Voltage Directive EEC 73/23 and with the Marking
Directive EEC 93/68,
SAECO INTERNATIONAL
GROUP
has set up a technical file for the vending machine
BP 56/BP 36
in its offices, by acknowledging in the
design phase the standards listed below:
- EN 55014
- EN 6100-3-2
- EN 61000-3-3
- EN 61000-4-2
- EN 61000-4-3
- EN 61000-4-4
- EN 61000-4-5
- EN 61000-4-11
- IEC 335-2-75
- IEC 60335-2-24
Fig. 33
5.2
General safety standards
Warning
In case of damage or improper functioning of your machine,
please contact an AUTHORIZED SERVICE CENTER.
It is forbidden to:
- tamper with or cut out the safety systems installed on
the vending machine;
- carry out any maintenance operations on the vending
machine without having first disconnected the power
cord;
- install the vending machine outdoors. The vending
machine should be installed at a dry location where
temperature never goes below 1
°
C.
- use the vending machine for purposes different from
the uses listed in the sale contract and in this manual;
- use water jets to clean the machine (Fig. 34).
Fig. 34
It is mandatory to:
- check the power line compliance;
- use original spare parts;
- thoroughly read the instructions contained in this manual
and in the attached documents;
- use personal protection devices during installation,
testing and maintenance operations.
Human error preventing precautions:
- increase the workers’ awareness of safety issues;
- handle the vending machine safely, both when it is still
packaged and after unpacking;
- becoming familiar with the machine installation proce-
dure, operation and limits;
- dispose of the vending machine safely and in compliance
with the workers’ health protection and environment
protection standards in force.
