Saeco 5P, Instruction And Maintenance Manual

Page: 54 / 64

22
English
8 - USE OF THE VENDING
MACHINE
Important
Before using the vending machine it’ necessary to carefully
read this publication and acquire a good general knowledge
of the vending machine.
After a period of inactivity of the vending machine it is advis-
able to read chapter “8.6 First start of the Vending machine”
before re-using it.
8.1 Machine statuses
Depending on electric mains supply, the vending machine may be
in one of the following statuses:
Off and electrically isolated
- Main switch (ref. 25 , fig. 1) in the “ O “ position.
- Only the programmed data maintenance memory is active.
On
- Main switch (ref. 25 , fig. 1) in the “ I “ position.
- All the functions are active and the display (ref. 1 , fig. 1) is on.
Standby (vending machine off, but not electrically isolated)
- Main switch (ref. 25 , fig. 1) in the “ I “ position.
- The “
ON/OFF TIME
” function is set on “
YES
”.
- The display and the programmed data maintenance memory
are active.
8.2 Manual start
This type of start up is required when the vending machine is in the
“Off and electrically isolated” status. (see 8.1 Machine statuses).
Follow the procedure described in “8.6 First start of the vending
machine”, eventually leaving out the control of the dispensed drink.
8.3 Programmed automatic start
This is possible when the vending machine is on “
STANDBY
” and
the “ ON/OFF TIME ” function is active and set.
Vending machine start up occurs at the programmed time.
8.4 Drink dispensing
• Choose a drink among the ones available and identify the
corresponding price.
• Insert coins (or tokens) in the special slot (ref. 4 , fig. 1) until the
display (ref. 1 , fig. 1) visualizes the required amount.
Warning
It’s impossible to insert coins once the amount equalling the
maximum vending price has been reached.
• Extract a cup and place it in the dispensing slot (ref. 9 , fig. 1).
The display indicates “ SELECT BEVERAGE ” (select drink).
Warning
If a button is pressed corresponding to a drink having a higher
price than the one inserted, it’s necessary to insert more coins
and press the chosen button once again.
The display indicates for a moment “
INSERT COIN
” (insert
token)
• Press the button corresponding to the chosen drink.
Warning
In order to avoid scalds, wait for the dispensing end signal
(red light turning off) before inserting your hand in the dis-
pensing slot.
8.5 First start
of the Vending machine
Once the drinks dispensed by the vending machine have been
determined (see “7 - Programming”), get the products to be insert-
ed in the containers (coffee, soluble products, etc.).
Important
It is indispensable to use only soluble products declared to be
“suitable for automatic vending”.
Tank filling
Important
The lyophilized product must compulsorily be poured in its
container (ref.
6 , fig. 1).
Do not put coffee beans in the soluble product container.
Soluble product container (only D.A. 5P)
Proceed in filling the lyophilized product container:
-
Extract the container from its seat by slightly lifting it to make its
extraction easier.