Saeco 10003064, Operating Instructions Manual

Page: 38 / 96

• 38 • • 38 •
• Immerse the steam/hot water wand
(Pannarello, if supplied) in the milk to
be heated.
• Turn the selector dial counter-clockwise
to set it to the “ ” position. Froth the
milk by gently swirling the cup.
• After dispensing steam for the desired
time, turn the selector dial clockwise
and set it back to the “ ” position to
stop dispensing steam.
• The same procedure can be used to heat
other beverages.
After using the steam/hot water wand
(Pannarello, if supplied), wash it as de-
scribed in the “Cleaning and Maintenance”
section.
After using steam to prepare
a beverage, it is possible to
brew coffee or to dispense steam
straight after.
If the selector dial is left on
the central position
“ ” , the
machine, in order to save energy, au-
tomatically reaches the temperature
needed to dispense coff ee.
CLEANING AND
MAINTENANCE
General cleaning
• Empty and clean the dregdrawer daily,
with the machine turned on.
• Maintenance and cleaning operations
can only be carried out when the ma-
chine is cold and disconnected from the
power supply.
• Do not immerse the machine in water.
• Do not wash any of its parts in the
dishwasher.
• Do not use sharp objects or harsh
chemical products (solvents) for clean-
ing.
• Use a soft, dampened cloth to clean the
machine.
• Do not dry the machine and/or its
components using a microwave and/
or standard oven.
After frothing milk bever-
ages, dispense hot water
from the steam/hot water wand
(Pannarello, if supplied) to obtain a
thorough cleaning.
• Every day, after frothing the milk,
remove the external part of the steam/
hot water wand and wash it with fresh
drinking water.
• Clean the steam wand weekly. In order
to do this, you have to:
- Remove the external part of the
Pannarello (for standard cleaning);
- Remove the upper part of the
Pannarello from the steam wand;
- Wash the upper part of the Pannarello
with fresh drinking water;
- Wash the steam wand with a wet
cloth and remove any milk residue;
- Replace the upper part in the steam
wand (make sure it is completely
inserted).
Reassemble the external part of the
Pannarello.