-54-
Appendix
Ⅲ
Functions of
SAE-M8000
1. MANUAL SWITCH
1.1 To display a video on current monitor
Operation: Press X+CAM
(X: Camera ID; X= 1~1024; 1-CAM0001, 1024-CAM1024)
EXAMPLE: To display CAM4 on current monitor
Operation: Press 4+CAM
1.2 To set current monitor
Operation: Press X+MON
(X: Monitor ID; X=1~64; 1-MON01, 256- MON64)
EXAMPLE: To set MON4 as current Monitor
Operation: Press 4+CAM
2. VIDEO SWITCH
2.1 To display previous video on current monitor
Operation: Press
PREV
2.2 To display next video on current monitor
Operation: Press
NEXT
3. AUTO SEQUENTIAL SCAN
3.1 To set scan range
Operation: X+PREV+Y+NEXT
(X: Start Camera ID; Y: End Camera ID)
X=Y Invalid Command
X>Y Scan from X, one by one to Y with a reverse sequential turn, lastly go back to X and cycle
X>Y Scan form X, one by one to Y with a forward sequential turn, lastly go back to Y and cycle
Note:
X,Y must be set together. If not, system will adopt the default number 1~1024
EXAMPLE: To switch from CAM3 to CAM8
Operation: Press 3+PREV+8+NEXT
3.2 To activate auto sequential scan
Operation: SHIFT +X+SCAN
(X: dwell time of each camera video, 1-255 second)
EXAMPLE: to run auto sequential scan on current monitor with dwell time of 3 seconds.
Operation: SHIFT+3+SCAN
3.3 To stop auto sequential scan
Operation: Press SHIFT+0+SCAN
4. SALVO SWITCH
Activate programmed salvo switch
4.1 To set dwell time
Operation: SHIFT+X+DWELL
(X: dwell time of each step, 1~255 second)
Note:
Default time is 2 second; It is valid for 1~10 salvo switch groups; Even if a salvo switch
sequence is running, user can set the dwell time.
