SAE M8000 User Manual Download Page 40

Page: 40 / 63

-40-

Setting at<Alarm Setup>menu:

1. Move the flashing cursor to the selected item by moving the joystick up and down. Move the joystick right

to enter the item or input the selected item number directly to enter.

2. If no item needs to be changed, move the flashing cursor to 0 by moving the joystick up and down, move

the joystick right to exit or input 0 directly to exit.

5.8.1 Alarm Mode Setup

Select<Alarm Mode Setup>at<Alarm Setup>menu: move the joystick up and down at<Alarm Setup>menu,
move the flashing cursor to 1, then enter <Alarm Mode Setup>by moving the joystick right or input number
1 directly. As figure 55 shows:

Figure

55 Alarm Mode Setup

Setting at<Alarm Mode Setup>menu:

1. Move the joystick up and down or input the area number directly (total 64 areas), then turn the joystick

clockwise to enter Alarm Mode.

2. Select Alarm Mode by moving the joystick up and down, then move the joystick right to enter Monitor

Editing.

3. Select monitor ID by moving the joystick up and down or input the number key directly, then move the

joystick right to next monitor edit. Setup method is the same as upper steps. Move the joystick right to
enter the Clearance mode.

4. Move the joystick up and down to select the Clearance mode: Manual ACK/ Auto ACK; ACK-Time can be

edited when at the Auto ACK state.

5. Move the joystick up and down or input number directly to setup the ACK-Time, move the joystick right

to enter User ID.

6. Move the joystick up and dome or input number directly to select the User ID.
7. Exit: turn the joystick anticlockwise to go back area ID.

Note: When the probes over 128 in an area, another area can be distributed to the user. But all the Alarm

Mode setup of these two areas should be the same.

Alarm Mode Setup

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Area ID

：

001 Name

：

*Area Title A0001*

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Alarm Mode

：

Fixed Dis 4

Monitor1 | Monitor 2 | Monitor 3 | Monitor 4

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Clearance

：

Manual ACK

ACK-Time

：

OFF

User ID

：

001

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

15/7/2004 16:42:32

Summary of Contents for M8000
































































Search results

Summary of Contents for M8000

Reviews:

Related manuals for M8000

Brands by name

Popular brands

SAE M8000, User Manual

Search results

Summary of Contents for M8000

Reviews:

Related manuals for M8000

Brands by name

Popular brands