background image

   

 

17801 S

OUTH

 S

USANA

 R

OAD

,  R

ANCHO

 D

OMINGUEZ

, CA 90221     (310) 638-1222   5 / 6

www.saddlemen.com

FTB (rev5   08-29-2013)   11-400284

WIDE SISSY BAR MOUNTING SUGGESTION

:

Set the rods 

through the outer loops 

and 

on the back of the pack and the

mounting strap 

to create a sleeve

 

that snugly fits around a wide sissy bar and

pad.

NARROW SISSY BAR MOUNTING SUGGESTION

:

Set the rods 

through the inner loops 

and 

on the back of the bag and the

mounting strap 

to create a sleeve that snugly fits around a narrow sissy bar and

pad.

TAPERED SISSY BAR MOUNTING SUGGESTION

:

To set the shape of the mounting strap sleeve to fit a tapered or an angled sissy bar,

set the rods 

through the inner loops 

and the outer loops 

on the back of the

bag and the mounting strap 

to create a triangular sleeve

 

that matches your sissy

bar and pad.

2

2

2

2

2

INSTALLATION INSTRUCTIONS (Sport Trunk Rack Bag):

Your Saddlemen FTB Sissybar Bag has been designed to be mounted to most trunk

racks (like the accessory racks installed on Gold Wing or H-D models with Tour

Packs).

Separate the hook & loop material on the mounting strap loops that are installed at

the base of the bag. put each side of the mounting loop 

1

 around the tubular sec-

tion of the rack 

2

 and press the material together firmly.

IMPORTANT:

To ensure secure mounting, you may have to adjust the position and tight-

ness of the mounting loops several times as you attach the bag to the rack.

After each adjustment, press on the sides of the bag and carefully lift up to

verify that it is securely mounted to the rack.

1

1

1

1

1

4

4

4

4

4

3

3

3

3

3

1

1

1

1

1

4

4

4

4

4

2

2

2

2

2

3

3

3

3

3

1

1

1

1

1

2

2

2

2

2

4

4

4

4

4

3

3

3

3

3

IMPORTANT REMINDER:

Make sure the rods 

are inserted into both the upper 

2

2

2

2

2

 and lower 

loops

on the bag when you are adjusting the size of the mounting strap 

4

4

4

4

4

. After

putting a rod into both the upper and lower loops and the mounting strap

loop, make sure the rod retention flap 

is pressed down, to full engage the

hook & loop fasteners.

5

5

5

5

5

1

1

1

1

1

2

2

2

2

2

The images in this instruction set may be different than your accessory or motorcycle.

                        

Continued on next page..

.

Summary of Contents for FTB Series







Reviews: