Sacmi CVS Series, Technical Documentation Manual

Page: 35 / 68

SAFETY EQUIPMENT AND PRECAUTIONS 3
3-1
004AZ011B
3 SAFETY EQUIPMENT AND PRECAUTIONS
3.1 SAFETY DEVICES
3.1.1 GENERAL STANDARDS
D0003276_00
SAFETY
INSTRUCTIONS
The CVS is not provided with mechanical safety devices as it basically is an electric equipment; safety devices should
be provided in the conveyor systems in which the CVS are installed.
It is severely forbidden to alter, tamper with or lock out in any way the safety system provided.
SACMI shall not be held responsible for any personal injury or property damage resulting from tampering or failure
to use the safety devices provided.
The presence of safety devices does not exempt the operators from exercising extreme caution during work, avoiding
actions that may endanger him/herself or damage the electronic equipment at all times.
3.1.1.1 Required environmental conditions for correct electronic equipment operation
The conditions required are those commonly found in an industrial environment.
The environment must be adequately ventilated with openings that admit fresh air to replace stale air.
The user must assure that the lighting in the work areas allows the operations and all electronic equipment parts to
be clearly seen. The lighting must meet standard . In particular, it must be free of shadows, bothersome glaring and
stroboscopic effects.
Some environmental conditions such as sea level, high relative humidity and high temperatures may affect the
electronic equipment operation, therefore these particular conditions should be specified at the time of order.
- The electronic equipment is designed to work only indoors.
- The electronic equipment is designed to work at a temperature ranging from +5 °C to +40 °C.
The electronic equipment is designed to work at a maximum temperature of 40 °C with relative humidity less than
50%; higher relative humidity may be permitted at lower temperatures (for example 90% at 20 °C).
- The electronic equipment is designed to work at altitudes less than 1000 m above sea level.
- The electronic equipment con be stored in areas where the temperature ranges from -25 °C to +55 °C (the
maximum temperature may reach 70 °C only for periods < 24 hours).
- The electronic equipment is not designed to work in a potentially explosive atmosphere.
- The electronic equipment is not designed to work in areas where fires may break out.
- The electronic equipment is not designed to work in dusty environments.
- The electronic equipment is not designed to work in the presence of acids, corrosive agents, and salt.
- The electronic equipment is not designed to work in the presence of ionizing and non-ionizing radiation (X-rays,
lasers, microwaves, ultraviolet rays).