8
RESET SACKIT ROCK 300
We have put together a clip for you where you can see exactly what you need to do to reset your earbuds.
Watch it now on our SACKits YouTube channel:
https://bit.ly/34TWCjk
1. Before you reset make your device forget SACKit Rock 300 in Bluetooth settings on your device
2. Turn Bluetooth OFF before resetting SACKit Rock 300
3. Place both earbuds in the charging case
4. Take both earbuds out of the charging case
5. Follow the steps below (one earbud at a time)
6. When both earbuds are reset, put them back into the charging case and wait 10 sec. before taking
both earbuds up at the same time. The earbuds will automatically pair with each other.
7. Now folllow “How to pair SACKit Rock 300 earbuds with Bluetooth devices” on page 6.
Press and hold for
5 sec. until earbuds
flash red and go out.
Press and hold for 11
sec until the earbud
flashes red and white
continuously.
Reset ROCKit
Pairing mode
Reset
Connects automatically
Click and hold
Power off
Click and hold
Power on
Click and hold
R
Click five times
TIPS: red and white LED
quickly flash alternately
TIPS: red and white LED slowly flash alternately
L
05
05
R
05
R
R
L
05
L
L
03
03
After reset, L earbud will automatically
enter the pairing mode with red and white
LED, then the phone can search for earbuds.
ROCKit L
Select on phone
11
05
