Manual
Reporter 75H
- 2 -
The standard configuration of the power cable is a XLR 4-pin
male connector. Types with another connector are available.
The Reporter 75H can be powered from an energy source with
a mainvoltage of 13,2V (11 - 15V, depending on the used
bulb), how the Sachtler Belt-Pack
®
battery type B1245 or
B1270.
3
Operation
3.1 Inserting the bulb
In order to insert the bulb, you have remove the bulb
carrier from the housing.
1
rotate the bulb carrier to the spot-position
2 push the lampholder into the housing and rotate it
clockwise to end stop
3 take out the bulb carrier from the housing and push
the bulb firmly and straight into the socket
4 put in the bulb carrier - kindly note the mark - and let it
snap in by an anticlockwise rotation
1
2
bulb carrier
