Manual
Reporter 75H
- 4 -
3.2 Powering the luminaire
Attach the PowerBase with the camera-mounting and
connect the connecting cable to an appropriate power
source (refer to 2. Properties). Alternative mounting
accessories are available.
Attach the luminaire-unite to the PowerBase (see below).
Switch on the luminaire by using the on/off switch at the
PowerBase.
Adjust the luminaire-housing with the double hinge to the
desired position. The friction of the joints can be adjusted
with the two socket screws.
For focussing, rotate the lampholder to the required positi-
on.
to take down the
luminaire-unit, push
the rocker
attach and take down the
luminaire unit
adjust the friction of the
double hinge
bulb carrier
camera mount
