- 3 -
Reporter 650HS
Manual
3.2 Starting the luminaire
Please make sure that line and bulb voltage are compatible
with the fuse rating:
110V with F6.3 A fuse 5 x 20mm
220V up to 240V with F4 A or F 6.3 A fuse 5 x 20mm
Open the four-leaf-barndoor on the luminaire and connect
cable with mains. Put the luminaire into its operating positi-
on and switch it on by using the cable switch. During ope-
ration make sure to move the luminaire very carefully since
the bulb reacts very sensitive to any vibration.
3.3 Switching off the luminaire
Use cable switch to switch off luminaire and let the lamp
cool down for at least 10 minutes before packing it away
again.
3.4 First operation
During the first operating hours you will notice smoke and
slight odour coming from the luminaire which should not be
of any concern and which does not indicate any malfunc-
tion.
3.5 Changing the bulb
If the bulb is damaged or deformed, it must be replaced
with a new one.
Switch off the luminaire and disconnect it from mains. Let
the luminaire cool down for at least 10 minutes.
➪
CAUTION! Hot bulb!
After the luminaire has been opened the bulb can be chan-
ged (see 3.1 Inserting the bulb).
4
Troubleshooting
There are no serviceable parts inside. Please use the following
troubleshooting tips in case of malfunction.
