Sachtler CamCrane EFP, User Manual

Page: 44 / 57

CamCrane EFP Manual
- 38 -
Õ
First, hang the basic cables to the weight
pipe.
In the process, please be sure to follow the
color-coding.
Basic cables are not required for assembly
with the cable set “super-short “.
In this case, hang one end of each cable to
the weight pipe and the other end directly to
the pipe with the camera plate.
Õ
Hang the basic cable’s snap hook to the
cable set ring appropriate to the desired
crane arm length.
Õ
Hang the other end of the cable to the pipe
with the camera plate.
Please be sure to follow the color-coding.
−
Assembly for crane arm length “long“:
Each tower and outrigger cable in the
cable set “long“ consists of two cable
sets. One cable end is attached to the
basic cable, and the other cable ends are
hung on the support pipe and the pipe
with the camera plate.
−
Assembly for crane arm length “extra-
long“: Extension cables are used to
extend the cables in the cable set “long“.
After all cables have been hung, the next step is
to tighten them.
Õ
Lay the cables in the guiding slots at the ends
of the outriggers and towers on the main pipe
(all lengths) and the support pipes (for crane
arm lengths "long" and "extra-long".)