- 3 -
Vario Pedestal 2-75
Studio Pedestal 2-75
Manual
Press down red slider at the side of the dolly and
swing out swivel arm at the same time, release sli-
der after disengaging. Make sure that swivel arm
locks again automatically in the desired position and
slider moves up.
1. locking position = standard track
2. locking position = narrow track (690mm)
Changing track is not possible when using the
Studio dolly.Lock at least one pair of wheels with the
wheel brake.
Check, whether the lock collar on the guide tube of
the dolly is opened sufficiently to receive the column.
3.1.2 Column
The contracted column with the transport lock enga-
ged can be carried on the exterior steering rod.
Place the column utmost vertical and in the right
position into the guide tube (watch position of the
side cardan). When the locating pin engages and the
column is in its lowest position the lock collar must
be tightened.Do not overtighten the lock collar!
Fig. 3
Cardan
Centering pin
