- 9 -
Vario Pedestal 2-75
Studio Pedestal 2-75
Manual
4
Troubleshooting
Please use the following troubleshooting tips in case of malfunc-
tion.
Remedy
Open all wheel brakes.
Check, whether column is anchored deep
enough into the dolly, open clamp and
re-insert column again (see set-up
instructions).
Check, whether overload protection is
disengaged. If so, hold disaligned wheel
and turn steering wheel until it engages
again.
Check, whether lock collar is opened.
Check, whether pressure in the column is
too high. If so, vent pressure.
Check, whether column brake and drag
are opened fully
Problem
Difficulties to steer the standing dolly.
Dolly cannot be steered, steering wheel
spins freely.
One or more wheels do not run in one
direction, dolly cannot be pushed.
Column does not enter into the dolly.
Transport lock of column does not open
(column cannot be compressed far
enough)
Column does not move or moves with
difficulty.
5
Technical Specifications
55 kg (121 lbs)
82 kg (180 lbs)
75 kg (165 lbs)
66 (26 in.) to 143 cm (57 in.)
77 cm (30 in.)
69 (27 in.) to 92 cm (36 in.)
89 cm (35 in.)
FB Quickfix
Weight:
Vario Pedestal 2-75:
Studio Pedestal 2-75:
Carrying weight:
Height min./max.:
On air lift:
Clearance: Vario Pedestal 2-75:
Studio Pedestal 2-75:
Head fitting:
On top of the steering wheel are situated compartments
which firmly hold the trim weights in place.
The transport boxes for the trim weights are mounted on
the dolly. A locking lever prevents the weights from falling
out during transport.
