SACH INTEGRA VAC, User Manual

Page: 15 / 38

INTEGRA VAC
KITCHEN PLINTH
MARK THE POSITION OF THE REAR OF THE DRAWER COMPARTMENT ON
THE BOTTOM OF THE KITCHEN CABINET TO ENSURE IT LINES UP WITH
THE PLINTH WHEN INSTALLED.
ENGLISH
5. CONNECTING THE CENTRAL VACUUM UNIT
ELECTRICAL CONNECTIONS
INSTALLING THE CENTRAL VACUUM UNIT
1. BENEATH A KITCHEN CABINET
MARK THE POSITION OF THE INTEGRAVAC AND CUT OUT THE PLINTH TO FIT THE UNIT.
For this a mínimum plinth height of 145mm is required.
CONNECTION OF THE CENTRAL VACUUM UNIT TO THE PIPE NETWORK AND THE CENTRAL VACUUM
EXHAUST.
SIDE VIEW
REAR VIEW
ON/OFF SWITCH
SOCKET FOR POWER LEAD
CONNECTION TO THE CENTRAL VACUUM EXHAUST
CONNECTION TO THE CENTRAL VACUUM PIPE NETWORK
LOW VOLTAGE CONNECTION
TO INLET VALVES
REQUIRED DIMENSIONS OF THE GAP IN
THE KITCHEN PLINTH
It is recommended that the central vacuum unit is
connected both to the pipe network and the exhaust
by means of 50mm diameter pipe 40cm in length
(included in the box) in length with a view to
facilitating easy removal of th INTEGRA central
vacuum unit at a later date, should this be required.
INTEGRA VAC
- Central Vacuum Systems User guide
33
200mm
125mm
145mm
Central Vacuum Systems