22
Workplace safety
•
Keep your work area clean and well lit.
Messy or unlit work areas can lead to accidents.
•
Do not use the power tool in an explosive environment with flammable liquids, gases or dust.
Power tools generate sparks, which can ignite the dust or vapours.
•
Keep children and other persons at a distance when using the power tool.
If distracted, you may lose control of the device.
•
Do not use the appliance in bad weather if there is a danger that lightning could strike.
Electrical safety
•
Avoid touching earthed surfaces such as pipes, heaters, ovens and fridges. There is an increased risk of electric shock if your body is earthed.
•
Keep power tools out of the rain and wet. Water penetrating a power tool increases the risk of an electric shock.
Personal safety
•
Pay attention. Watch what you are doing and take care when working with a power tool. Do not use a power tool if you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention during use of the power tool can lead to serious injuries.
•
Wear personal protective equipment and always safety goggles.
Wearing personal protective equipment, such as dust masks, non-slip safety gloves, a helmet or ear
protectors reduces the risk of injuries depending on the type and use of power tool.
•
Avoid accidental start up.
Ensure that the power tool is switched off before inserting the battery, carrying lifting or carrying it.
If your finger touches the switch when
carrying the power tool or if the battery is inserted when the power tool is on, it may lead to accidents.
•
Remove setting tools or screw keys before switching on the power tool.
A tool or key inside a rotating tool can lead to injuries.
•
Avoid unergonomic postures.
Make sure you are standing on safe base and keep your balance at all times. This allows you to control power tool better in unexpected
situations.
•
Wear appropriate clothing. Do not wear loose-fitting clothing or jewellery. Keep hair, clothing and gloves away from moving parts.
Loose-fitting clothing, jewellery and
long hair can be trapped in moving parts.
Careful handling and use of power tools
•
Do not overload the tool. Use the right power tool for your task.
You work better and more safely in the stated performance range with the right power tool.
•
Do not use a power tool if its switch is defective.
A power tool, which can no longer be switched on or off, is dangerous and must be repaired.
•
Remove the battery before adjusting settings, replacing accessories or after use.
The safety provisions prevent the power tool from starting accidentally.
•
Store all unused power tool out of the reach of children. Do not let persons use the device, who are unfamiliar with it or who have not read these instructions.
Power
tools are dangerous if they are used by inexperienced persons.
•
Carefully maintain your device. Check the moving parts work correctly. Ensure that no part of the device is damaged. Check the assembly and all other elements that
could affect the operation of the device. If parts are damaged, you must get your device repaired before use.
Many accidents are caused by poorly maintained power
tools.
•
User power tools, accessories, insert tools, etc. according to their instructions. Consider the working conditions and work to be performed.
Using power tools for other
applications other than intended can lead to dangerous situations.
Specific safety provisions for power tools
•
Before inserting the battery, ensure that the switch is either at "Off" or is locked.
Inserting a battery into a switched-on device can lead to accidents.
•
Charge your device's battery only with the charger specified by the manufacturer.
An unsuitable charger can cause a fire if it is used with a battery type other than that
specified by the manufacturer.
•
A specific battery type must be used for each battery -powered tool.
The use of a different battery may lead to fire.
•
Keep an unused battery away from metal objects such as paperclips, coins, keys, screws, nails and all other objects that could connect the contacts.
A short circuit of
the battery can cause burning or fires.
•
Avoid all contact with battery fluid because of misuse. If battery fluid escapes, the affected area must be rinsed with fresh water. See a doctor if battery fluid comes
into contact with the eyes.
Splashed battery fluid can cause irritations or burns.
•
All safety information regarding the handling, storage, safekeeping, transport, disposal of the lithium-ion battery and first-aid measures and measures for
combating fires is contained in the "Product safety datasheet" at www.sabo-online.com under Instructions.
Information hotline for lithium ion batteries
+49 (0) 2261 704-0
Repair
Only have your power tool repaired by a qualified expert and only with original spare parts.
This ensures that the power tool remains safe.
•
When working with this device, do not touch the fan.
•
Make sure that the device's handles are always clean and dry.
INSTRUCTION
•
Read the instructions carefully. Familiarise yourself with the operating elements and correct device operation.
•
Never let children, persons with restricted physical, sensory or mental capacity or without experience or knowledge, or persons unfamiliar with these instructions, to use the product.
Local provisions may limit the age of the
user.
•
Never use the device if persons, particularly children, or animals are nearby.
•
The operator or user is responsible for accidents with or dangers to other persons or their property.
Summary of Contents for LB-660
Page 2: ...2...
