Page Number
4
THE AUTOSCALER DIRECTIONS FOR USE Rev: A March 16, 2007
ELECTRONIC GENERATOR AND WATER SYSTEM
The electronic generator produces the frequency, and the power to
activate a wide variety of interchangeable
Sable Scaling TIPS.
The water
system provides precise control over the water (lavage) flow, which serves to
wash debris from the work area, and to cool the laminations of the insert tip.
The following controls are found on the front panel of
THE AUTOSCALER
.
!
TOGGLE SWITCH:
To turn unit On and Off.
!
INDICATOR L.E.D. LAMP:
(above the switch) which lights when the
Toggle Switch is set to the
ON
position, indicating the unit is
ready
for operation.
!
POWER CONTROL KNOB:
NOTE:
FOLLOW INSERT MANUFACTURERS
COMPLETE INSTRUCTIONS, Linear
Power Control knob adjusts the output
power to the insert tip. The
BLUE
shaded
area is for use when using modified
Periodontal inserts
. It is recommended
the Power
not
be set higher than
12:00
even if no mist appears at the tip.
!
WATER / LAVAGE CONTROL KNOB:
For adjusting the flow of
water to the handpiece, and insert tip. To obtain the
NECESSARY
water flow of at least
(18cc - 30cc/+/minute) -
It may require
ONE
or
MORE
complete rotations of the knob in either direction.
HIGHER
water flow to the
RIGHT,
and
LOWER
water flow to the
LEFT.
!
HANDPIECE PANEL RECEPTACLE:
Accepts the
MALE
side of the
Handpiece connector with lock ring.
