56
Sabine 2.4 GHz Smart Spectrum
®
Wireless
© 2007 Sabine, Inc.
Appendix F: Battery Endurance Tests (Typical)
Appendices
NiMH AA Battery (SWBC1, Typical)
NiMH C Battery (SWAA2, Typical)
Appendix G: Changing Mic Capsules (SW70-H)
Sabine's Mic SuperModeling™ function requires a baseline characteristic for the capsule in use. Therefore, after changing
capsules, you will need to “tell” the transmitter which capsule is now attached. NOTE: this is only necessary when the capsule
is changed.
Open the handheld mic’s battery door.
While holding down the SELECT button, turn on the mic. Continue to hold the select button for
about 3 seconds, then let go.
One of the screens at right will appear in the transmitter LCD — showing the currently assigned
capsule.
Using the transmitter control up/down buttons, select the capsule you now have attached. Wait a
few seconds until the LCD cycles through the transmitter firmware version numbers and returns to
the default display (channel number).
IMPORTANT: In order for the new capsule selection to be saved, you must now edit the RF channel
selection. To do this, press the Select button, then use the up/down buttons to change the RF
channel. Wait a few seconds to allow the transmitter screen to return to the default display. NOTE:
you can return to the original channel by repeating the channel selection process.
Audix OM-3
Audix OM-5
1
2
3
4
5
Voice Technologies
