Sabik Marine carmanah 800 Series, User Manual

Page: 40 / 40

M850/M860 USER MANUAL
APPENDIX A: FLASH CHARACTERS
40 ©2020 Sabik Marine
Failure Possible Cause Recommendation
Lantern is dim Effective intensity setting is
lower than desired.
Verify the lantern’s
Effective Intensity settings .
The ALC function has
activated Tap quickly three times on the lantern head or left shoulder to
activate the LED display. Review the data on the LED display
to verify if ALC is “on” and if the lantern’s battery state-of-
charge (bAtt SoC) is low. Follow the
charging instructions .
GPS equipped lanterns
will not synchronize. GPS sync not enabled
Change the “SyNC: setting to “on”
following the instructions .
The lantern flash codes are
not the same. Verify that all GPS equipped lanterns are set to the same flash
code.
No IR output on lantern Lantern is not an IR version Use a suitable device to view IR output. If no output is seen,
contact customer service.