Sabik Marine carmanah 800 Series, User Manual

Page: 26 / 40

M850/M860 USER MANUAL
WARRANTY & CUSTOMER SERVICE
26 ©2020 Sabik Marine
Changing the Battery (12V) (Self-
Contained Only)
Battery replacement kits can be ordered directly
from Sabik Marine or from your authorized
distributor.
Consult the table below to match your 800 series
lantern with an appropriate 12V battery pack.
Pack Type Part No. Suitable for:
NP12-12 83700 M860, OL800
Large
Required tools:

Replacement Sabik Marine battery pack and
parts bag
 ¼” hex driver handle (required)

Ratchet with driver adapter (required)
Remove all jewelry including rings
and bracelets. Bridging battery
terminals with any metal could
cause high electrical currents and
severe burns.
1. Turn the lantern off .
2. Turn the lantern on its side. Use the ratchet
and driver to remove the four base plate
screws.
3. Hold the lantern by the base and head and
carefully return it to an upright position.
4. With the lantern in an upright position, slowly
lift the housing away from the base plate.
When lifting the assembly from the
base plate, the battery plug must be
disconnected prior to fully removing
the assembly. Also, note the
orientation of the assembly with
respect to the base plate
5. Disconnect the battery harness and place
the housing to one side.
If the optional charge port harness is
present, it can remain in place