58
EN
Change-Over probe T2
Code 9025310
Only on the fan coil units designed for two-pipe
systems, the heating/cooling changeover can be
performed automatically by installing, on the water
pipe supplying the coil, the Change Over probe T2
(optional).
The probe must be placed upstream the 3 way valves
Based on the temperature measured by the probe,
the unit will switch to heating or cooling operation.
If using probe T2 in installations with Master and
Slave units, probe T2 must be fitted on all the
appliances.
A = Water pipe
B = Probe
C = Anti-condensation insulation
A = Cooling
B = Fan only
C = Heating
A
B
C
Type: NTC 10K Ohm (25 °C = 10000 Ohm)
Probe length 1800 mm.
Summary of Contents for Ocean ECM
Page 2: ...2 IT da p 5 EN from p 39 FR à partir de la p 73 DE von S 108 ...
Page 53: ...53 EN Valve water flow rate chart Dp pressure drop Qw water flow rate ...
Page 87: ...87 FR Schéma débit d eau des vannes Dp perte de charge Qw débit d eau ...
Page 122: ...122 DE Diagramm Wasserdurchflussmenge Ventile Dp DruckverlusteWasser Qw Wasserdurchsatz ...
