Trol』bleshooting
Troublesh
。。
ting for Motors
Erro
『
Code
Cause
Solution
L01X Fan ove
『
loaded
Check if
恒
n is pre
届四，
and clean dust bin
LOX1 Left wheel
。
ve
『
l
。
aded
LOX2 Right wheel ove
『
loaded
LOX3 Left and right wheels ove
『
loaded
LOX4 Left side brush
。，v
erl
。
aded
LOX5 Left wheel and left side brush ove
『
loaded
LOX6 Right wheel and left side brush
。，v
erl
。
aded
Check if it is stuck or wired by
LOX7 Left and right wheels, left side brush overloaded
。
bstacles
LOX8 Right side brush
。，v
erloaded
LOX9 Left wheel and right side brush overloaded
LOXA Right wheel and right side brush
。，v
e
『｜。
aded
LOXB Left and right wheels, right side brush overloaded
LOXC Left and right side b
『
ushes overl
。
aded
LOXD Left wheel, left and right side brushes overl
。
aded
LOXE Right wheel, left and right side brushes overl
。
aded
LOXF Left and right wheeles, left and right side brush overloaded
Note:
1. There is no problem for the robot when it displays LOOO.
2. X is the number or le忧er might appear on display for di何e
『
ent fault.
3. If robot displays E001 o
『
E004, please directly find the relative solution refe
『
red in
troubleshooting.
4. If robot displays EC07, please find ECXX and EXXX for relative solution refe
『
red in
troubleshooting.
5. Like wise, if robot displays EE91, please find EXX1, EEXXand EX9X fo
『陪
lative
solution referred in troubleshooting.
6. If above solution does not work, please t
『y
below:
a. Reset the robot by switching o仔the unit and then tum it on, and check again.
b. If it still does not work after reset, contact after sales.
7. UV light might hu
『
t your eyes, so please do not stare directly at the light when
turned on.
17
