Saba S 32 TNV 08, Operating Instructions Manual

Page: 90 / 103

English - 89 -
PIP Picture
Press  button to enter PIP Picture submenu.
Adjustments of Contrast, Brightness,
Sharpness, Colour, Reset and Store items in
this part are identical with
Picture menu in
the analogue TV menu System. Refer to
Picture menu explanations in the previous
parts.
PIP Position
This setting is used for moving the sub picture.
Select PIP Position item by using

/

button. Use  /  button to adjust PIP position .
PIP Position info will be displayed at the
bottom of the menu OSD. You can directly
change PIP position by pressing

/

buttons.
Positions available are: Bottom Right, Bottom
Center, Bottom Left, Top Left, Top Center and
Top Right.
PIP Source
PIP Source setting enables you to select the
source of the sub picture.
Select PIP Source item by using

/

button.
Use  /  button to set PIP source.
Note: When main picture source is TV, EXT-1, EXT-
2 or BAV , PIP window can only be set to HDMI-
1, HDMI-2, YPbPr, PC source or vice versa.
PIP SWAP
Select PIP SWAP item by using

/

button.
Use  /  button to set. This function enables
to swap between the main and the PIP picture.
PAP
In the Feature menu, highlight PAP item by
pressing

/

buttons. Press

button to
enter PAP submenu:
PAP
Off
PAP Picture
PAP Source
( PAP ON-OFF
PAP SWAP
PAP ON-OFF
You can activate or deactivate PAP mode by
pressing  /  button.
PAP Picture
Press  button to enter PAP Picture submenu.
Adjustments of Contrast, Brightness,
Sharpness, Colour, Reset and Store items in
this part are identical with
Picture menu in
the Menu System. Refer to Picture menu
explanations in the previous parts.
PAP Source
Select PAP Source item by using

/

button. Use  /  button to set PAP source .
Note: When main picture source is TV, EXT-
1, EXT-2 or BAV , PIP window can only beset to
HDMI-1, HDMI-2, YPbPr, PC source or vice
versa.
PAP SWAP
Select PAP SWAP item by using

/

button. Use  /  button. This function enables
to swap between the main and the PAP picture.
Note: See Appendix C for all PIP/PAT modes.
Sleep Timer
Press or button to select Sleep Timer .
Use  /  button to set the Sleep Timer .
The timer can be programmed between Off
and 120 minutes in steps of 10 minutes.
02-ENG-32820W-1050UK-17MB12-PANEU IDTV-(2 HDMI-3D PAN-BASIC PIP-VGA-WO SVHS)-50131284.p65 23.07.2008, 10:38 89