Avoid placing the dishwasher in a location where the temperature
is below 0°C� If this is unavoidable, empty the dishwasher, close the
door, disconnect the water inlet pipe and empty it�
Frost Precautions
The spray arms can be easily removed for periodic
cleaning of the nozzles, to prevent possible
clogging�
To remove the upper and lower spray arms, hold
and unscrew or pull them out�
Wash the spray arms under running water and
attach them back in place,
checking that the
rotary movement is in no way impeded.
Cleaning the Spray Arms
61
60
GB
GB
Troubleshooting
Problem
Possible Causes Solutions
Dishwasher
will not
start�
Fuse blown, or
the circuit breaker
tripped
Replace fuse or reset circuit
breaker� Remove any other
appliance sharing the same circuit
with the dishwasher�
Power supply is
not turned on�
Make sure the dishwasher is
turned on and the door is closed
securely�
Make sure the power cord is
properly plugged into the wall
socket�
The door has not
been properly
closed�
Close the door securely�
Water not
pumped
from
dishwasher
Kink in drain hose Check drain hose�
Filter clogged
Check the filters (see “Cleaning
the Filter Unit”)�
Kitchen sink
clogged
Check kitchen sink to make sure
it is draining well� If kitchen sink
is not draining, you may ask a
plumber to check it�
