Program Cycle Selection
Information
Description
of Cycle
Detergent
pre/main
Rapid
A shorter wash for
lightly soiled loads
that do not need
drying.
Wash (45°C)
Rinse (50°C)
Rinse (55°C)
25g
Soak
To rinse dishes that
you plan to wash
later that day
Prewash
Running
time (min)
Energy
(Kwh)
Water
(L)
Rinse Aid
Intensive
175
1.6
17.5
Normal
185
1.30
13.5
ECO
195
0.93
10
90 min
90
1.35
12.5
Rapid
30
0.75
11
Soak
15
0.02
4
NOTE:
*EN 50242 : This program is the test cycle.
The information for comparability test in accordance with
EN 50242, as follows:
• Capacity: 14 setting
• Position Upper basket: upper wheels on rails
• Rinse aid setting: 6
• PI: 0.49W; Po: 0.45W.
Left-on mode duration
: Power will be cut off automatically
after program finished for 30 minutes.
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and
push them back. It is commended to load the lower basket
first, then the upper one (see the section entitled “Loading the
Dishwasher”).
2. Pour in the detergent (see the section entitled “Salt, Detergent
and Rinse Aid”).
3. Insert the plug into the socket. The power supply is 220-
240VAC / 50HZ, the specification of the socket is 10A 250VAC.
Make sure that the water supply is turned on to full pressure.
4. Press the program button, the wash program will be changed
as follows direction:
90min->Rapid->Soak
Intensive->Normal
96
95
GB
GB
->ECO->
5. If a program is selected, the response light will light.
Then press the
Start/Pause
button, the dishwasher
begins to start.
