background image

 
 
 
 
 
 

Page 5 of 5 - Info sheet 007, version 080514 

 

SABA Dinxperlo BV 

Industriestraat 3, NL-7091 DC Dinxperlo, Postbus 3, NL-7090 AA Dinxperlo, Visiting address: Weverstraat 6, NL-7091 CM Dinxperlo, 
Tel +31 (0)315 658999, Fax +31 (0)315 658989, E-mail [email protected], Internet, www.saba.nl, Trade register Arnhem 09065419 

 

Our recommendations and conditions for use are based on the present status of know-how and technology. Customers and users should assess our 
products themselves for the desired application and demands. We are not responsible if our products are applied without considering our advice and/or 
conditions for use. Furthermore the General Conditions of the Dutch Association of Rubber and Synthetic Manufacturers, dated 01.01.1992, are applicable 
to our advice and conditions for use and the delivery of our products.

 

 

5.      Accessories 

 

The pressure tank and compressor will not be supplied by SABA. The suppliers and specifications below 
apply to the equipment used by the SABA Application Team during the development and testing of the LD 
40. The use of similar equipment from other manufacturers is possible at your own risk.  

 

Materials used which are 

not available

 from SABA 

Pressure tank

  

minimum contents 40 litres; working pressure 
maximum 6 Bar 

Example:   
Walther MDG 45 CIII pressure tank  
Internet www.walther-pilot.de 
 
Max. pressure 6 Bar 
Contents 45 Litres 
 

Compressor 

yield of compressor steady 6 Bar with second 
adjustable connection 

Example:   
Keaser 160 

 

Internet www.keaser.com 
 
Min. steady pressure 6 Bar 

 

 

 

The products in the starter set will only be supplied once by SABA.  
If you need replacement parts, you have to contact local manufacturers. It is important that the connections 
are universal and that the equipment applies to the following specifications: 

 

 

Rubber retaining ring

 

(C)

 

 

PVC Hose (B)                                                               

             

25 mm internal x 30 mm external   

Aba sunken worm screw hose clamp (E) 

 

Range of dimensions: 32 to 44 mm 
 

Normaplast ® Polyamide Hose socket (F) 

 

25 / R1’’   

 
 
The SABA Application team is at your service if you have questions, advice and/or comments. 

 

 

Summary of Contents for LD 40






Reviews: