9
8. Basic Operations
8.1 Turn on STB
First, connect to an
external 12V adapter
to turn on
the unit.
When the STB is first used, there will play the first
channel from the default Channel List. If the STB is not
first used, STB will play the same channel as last time
before turning off.
?
Frequently Asked Question
Q: The power of my STB has been turned on and not
in Standby mode, but the TV screen showed
nothing:
A: Make sure the TV set has been set to the correct
video input (not the TV channels). For example, if you
have connected the unit with the Video1 input of the TV
set, the TV set has to be switched to Video1.
Q: The power of my STB has been turn on and not in
Standby mode, but the TV screen showed
nothing except one box with
“No Signal” image.
A: That means the channel, which you select, is no
signal. It could be several causes:
1
The channel which you select is not in your
allocate satellite. The simply solution is to change
channel.
2
The signal of current TV channel is too weak. You
can try to change channel to other strong signal
channels. If the problems still exist, please consult
your local dealer or other professionals for
technical service.
3
You use the Dual LNB, and you need Modify LNB
Type
8.2 Power
1
Press [Power] Key can enter the Standby state
2
In Standby state, press [Power] Key again can call
back the unit and go on play the previous channel
3
User can also di
sconnect the device’s main power
to end the Standby state.
8.3 Channel Up/Channel Down
In full screen, press [CH+/CH-] to change channel.
8.4 Volume Up/Volume Down-
In full screen, press [VOL+/VOL-] to adjust volume.
8.5 Number
In full screen, use number key and press [OK] on the
Remote Control Unit to change channel.
8.6 Mute
1
Press [MUTE] key to mute the sound and the
screen will show up mute OSD.
2
Press [MUTE] key again to restore sound.
8.7 Pause
1
In playing mode, press [Pause] key, the picture will
be paused, but the sound of the channel will still
continues.
2
Press [Pause] key again, the screen
’s picture will
skip over to the current playing picture, and the
sound of the channel will corresponding playing.
8.8 Recall
Press [RETURN] key will directly switch to the previous
channel that you played before current channel.
8.9 Favorite
1
In full screen, press [FAV] key, it will display a
window of
“Favorite list” on the left of the screen,
which you can watch like below.
2
In the window of " Favorite list ", you can move
highlight by press [Channel Up/Channel Down]
key to select favorite Channels.
3
In the window of
” Favorite list ", you can press
[Left/Right] key to select favorite groups Pressing