8
Finally connect the coaxial cable from the LNB of your Dish to the LNB IN jack on the receiver.
7.1 TV with Motorized System (DiSEqC 1.2)
Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or
Receiver connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the receiver at the same time.
If you have two or more fixed antennas or LNBs, then we recommend you use a DiSEqC 1.0
switch.
7.2 Connecting the Network
1. Connecting to the LAN:
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
2. Connecting to the Wi-Fi (Wireless LAN):
You can connect the network via the Wi-Fi access point or DSL/cable modem.
a.
Plug in the wireless USB dongle to the USB port.(Separate purchase required)
b.
Set the options for the Wi-Fi.
1.
Network Name (SSID):
Select the network name of your Wi-Fi access point from the list.
2.
Security Type (WEP):
This product supports WEP 40/128bit ASCII and WEP 40/128bit HEX. The security
type of the Wi-Fi and the product shall be set the same.
3.
Password:
When using the security type, you must set the password. Enter the same password in the Wi-Fi
setting menu.
3. Connecting to the 3G:
Connect the network via the 3G dongle. Plug in the USB that has 3G dongle.
Note:
1) Make sure the distance between the Wi-Fi access point and the product is not too far away. This may lower
the quality of service.
2) It is recommended to purchase a wireless USB dongle distributed by RT5370. Other products may not
function or respond.
3) It is recommended to purchase a 3G USB dongle distributed by huawei E1750 , E1550 , E1752 , E173
Other products may not function or respond.
4) We recommend the network connection over a direct LAN.