NVR User Manual
74
Step1
Select channel from drop-down box list.
Step2
Check the
Enable
checkbox to enable motion detection function.
Step3
Select the
Sensitivity
and
Detection Interval
.
The higher the sensitivity, the NVR will be more easily alarmed.
The Detection Interval time between two motion detection.
Step4
Check the checkbox to select the linkage method. You may refer to follow table for details of
linkage methods.
Step5
Set Detection Area
1
．
Click
Set Detection Area
button and it pop up a window.
Parameter
Description
Alarm output
When the IO Alarm is triggered, you can choose whether to alarm via
the alarm output device.
Notes
:
Make sure you have installed the alarm output device.
Send E-Mail
When the Motion detection is triggered, you can choose whether to
send e-mail.
Note
: Make sure you have set Email.
FTP
When the Motion detection is triggered, you can choose whether to
upload detection picture to FTP server.
Note
: Make sure you have set FTP.
Record
If you select this checkbox, when the Motion detection is triggered,
the NVR will record automatically and store the record files to the
HDD.
Record Time
When you check the
Record
, you need to configure motion
detection recording time.
Buzzer
When the Motion detection is triggered, you can choose whether to
enable buzzing sound of the NVR device.
IPC Audio
Warning
If you select this checkbox, when the Motion detection is triggered,
the people around the camera will hear beep alarm sound of the
IPC.
